Locally owned and operated in Pinellas Park, FL, we have served this community since 1999. With our convenient location at 3200 62nd Avenue N. St. Petersburg, FL 33702, as well as our licensed technicians who can accommodate our customers by providing service at their location. This father-son-run company uses modern technology with old-fashioned values to provide the highest quality of fire safety products and services.
Fire extinguishers are used for a multitude of reasons. All Florida Fire Equipment has the inventory to cover all your extinguisher needs. Anything from a home, kitchen, office, firework display, vehicle, marine vessel extinguishers, etc. Following The National Fire Protection Association (NFPA), our licensed technicians can also service all your existing extinguishers and keep them updated.
They are inspected and certified annually, with maintenance typically performed every six and twelve years. Being located in Pinellas County, we can make this process quick and easy. Walk-in services are offered Monday through Friday, where inspection and maintenances are done right on the spot. No need to make an appointment; one of our friendly office staff will be able to take care of it, and it only takes about five minutes.
Annual inspections will include visually assessing the external structure, examining the gauge to ensure optimum pressure, replacing the tamper seal around the pull pin, and attaching a certification tag stating it was inspected by a licensed professional.
Recharges: A recharge will be performed when you have used your extinguisher or it has reached six years from the manufacturer date. Following the annual inspection process, internal maintenance will be done as well. Removing the chemical from within and examining the internal structure of the cylinder for fractures or contaminants. We remove any dirt and debris from the hose line, ensuring it’s clean and clear. New chemicals will be added, and the cylinder will be repressurized.
Hydrostatic Testing: All Florida Fire Equipment is one of the largest DOT (Department of Transportation) hydrostatic testing facilities in the Tampa Bay area. We can hydro-test not only your extinguishers but almost any other cylinder with a DOT number, from scuba tanks, paintball tanks, oxygen tanks, Kegerators, nitrogen, Co2, SCBA, and more.
When it comes to your extinguisher, a hydrostatic test will be performed once it reaches twelve years, based on the manufacturer’s guidelines. This process is more extensive to ensure the cylinder can withstand the pressure inside. The hydrostatic test will begin if it passes the internal and external visual examination. The cylinder is placed inside a water jacket and pressurized more with water added by a high-pressure pump. Specific measurements are taken then the water returns to normal pressure. Qualified extinguishers will then be refilled and repressurized; The valve and O-ring will be replaced, and the certification stickers will be attached.
While we take care of these services in-house, you don’t have to wait and be without your extinguisher. We’ll swap your extinguisher for an already maintenanced one, matching the make and model and making the whole process quick and easy for our customers. Just another way All Florida Fire is dedicated to keeping you and your business safe and protected at all times.
Not only are we one of the largest Hydrostatic Facilities, but we also have the equipment and capability to fill your Co2 bottle right here in Pinellas Park. So, while visiting our shop for your extinguisher or scuba tank, bring your cylinder in, and we’ll fill it with our beverage grade Co2. Don’t already have a beverage cylinder? We have them in stock, filled, and ready to go. We also offer a swap program. Just bring in your bottle, and we’ll swap it for a filled one. Having a variety of sizes available, we can accommodate all customers. Whether you have a small at-home kegerator and need a 2.5lb refill or have a bar that needs multiple 20lb bottles filled, we can take care of it.
Co2 is not just for beverages but is also a type of extinguisher. All Florida Fire Equipment offers Co2 extinguishers in multiple sizes and does the recharge as needed. So you never have to run out of Co2 for your draft beer at a BBQ or have an emergency and need a Co2 extinguisher.
Exit & Emergency Lighting
Something that gets overlooked but is very important is exit and emergency lights. It is imperative that they are in good working order. It could mean the difference between life and death as an emergency occurs, and people need to evacuate. Designed to illuminate the path to safety, these devices need to be checked annually.
Our licensed technicians will check the backup battery, light bulbs, and quality of the unit. Replacing the unit if needed or installing a new one in your location. After this is completed, they will attach a certification sticker stating it has been inspected.
Fire Suppression System
An automatic fire suppression system is designed to extinguish a fire without assistance. Stopping a small fire from becoming a large one that would have caused damage and cost lives. All Florida Fire Equipment has the knowledge and expertise to install a new system or update an existing system.
With installing a new system, we try to make the process as quick and easy as possible. The technician will go to your location to take measurements of your hood and cooking area. Drawings will be made up and submitted to the City of Pinellas Park for approval. Once that has been completed, we can install the system, typically done in one day. We’ll schedule an appointment with the Fire Marshal for the final test and have you up and running in no time.
Using all the top brands such as PyroChem, Amerex, Ansul, Range Guard, Protex, etc. We always have the products and materials in stock to service and maintain your system. Following NFPA guidelines, inspections will be done semiannually to keep your system updated. Having the latest information and technology, All Florida Fire can tackle any job, big or small.
Paint Booth Fire Suppression System
Fire suppression systems are not just for kitchens; they are also used in paint booths. Being in close proximity to tools such as welders, cutters, or grinders, paint mist can quickly cause a fire. The proper system installed and maintained can protect your employees and business from harm.
A technician will evaluate your paint booth and select a system that best fits your needs. Our most popular brand for paint booths is the PyroChem Monarch system. We also carry the Kidde and Ansul R101 if that best fits your needs. Designed to operate automatically, they will alert you of fire and stop oxygen flow to the paint booth, snuffing out the flame.
It should be checked semiannually and maintained according to NFPA Standard 33 and manufacturer guidelines like any other system.
Marine Fire Systems
There is nothing more dangerous than having a fire occur while out in open waters. Being far from help, you cannot take the risk of not having a marine fire suppression system. Whether you are boating for relaxation or making a living off the water, All Florida Fire has the best brands to keep you protected.
Using brands such as Sea-Fire and FireBoy, our marine techs can install and maintain your system. Manufacturer guidelines suggest that your system be inspected semiannually, while the Coast Guard mandates that your system be inspected annually.
Why Choose All Florida Fire Equipment?
We believe in providing the highest quality of work and carrying the best brands of fire protection. Our customer service is unmatched, and our company will be able to tackle any job, big or small, in the Pinellas Park area.
We know time and money are important to all our customers, which is why we have the best pricing, the best service, and reputation. Working around our customer’s schedules, we have the availability to suit your needs. Offering days, nights, and even weekends.
Working throughout the state of Florida for over 20 years. We take pride in our work and appreciate the opportunity to work with you.